Important; Maintenance Storage And Care Of The Powersock Battery Packs - therm-ic PowerSock Heat Socken Mode D'emploi

Programming mode
  
2. Bring the remote control very close to the two
PowerSock rc battery pack and press and hold
the "+" and "–" control buttons on the remote
control (Fig. 2.2) simultaneously for at least 5
seconds.

IMPORTANT:

The distance between the remote control and the
PowerSock rc battery packs may not be greater
than 15 cm.
3. The heat setting displays of the PowerSock rc
battery packs (Fig. 1.2) and the remote control
(Fig. 2.1) flash to confirm the synchronisation.
4. The PowerSock rc battery packs will
automatically switch to POWER-OFF mode after
the synchronisation.
MA I N TE N A N C E S TO R A G E A N D C A R E O F
TH E P O W E R S O C K B A TTE R Y P A C K S
To ensure a long life, we recommend storing the
PowerSock battery packs in a cool room (at
temperatures ranging from 5°C / 41°F to 20°C /
68°F) in a semi-charged status. The PowerSock
battery packs must be turned off (heat setting
display (Fig. 1.2) dark) and disconnected from the
sock and charger for storage.
For long-term storage, the PowerSock battery
packs must be discharged and recharged half at
least every 6 months (see table above for
information on half the charging time). This ensures
that the maximum battery power is preserved for
many years!
Clean the parts as needed with a soft, slightly
damp cloth and a mild detergent.
– 27 –