I N S TR U C TI O N S FO R U S E / E N G LI S H
connected socks with energy.
STANDBY:
The PowerSock battery packs are in standby and
can be activated via control buttons of the remote
control (Fig. 2.2) or by means of the + / - control
buttons of the PowerSock battery pack (Fig. 1.3).
The heat setting display (Fig. 1.2) briefly flashes
at an interval of 2.5 seconds.
U S E A N D FU N C TI O N
How to use the PowerSock battery packs
Turning the device on:
Briefly (approx. 1 sec.) press the "+" or "-" control
button (Fig. 1.3) to turn on the PowerSock battery
pack at the lowest heat level.
Turning the device off:
Press the "-" control button for a longer period of
time (3 seconds) (Fig. 1.3) to turn off the
PowerSock battery pack.
The PowerSock battery pack switches into
POWER OFF mode.
No LED is illuminated on the heat setting display
(Fig. 1.2).
The heat is off.
Changing the heat setting:
The +/- control buttons (Fig. 1.3) allow you to set
3 different heat levels.
Every time you push the "+" or "-" control button
(Fig. 1.3), the heat level changes.
The respective heat level is indicated by the
flashing of the heat setting display (Fig. 1.2) on
the PowerSock battery pack.
switched off
low heat level
moderate heat level
high heat level
– 24 –