Power Off; Function Description - therm-ic PowerSock Heat Socken Mode D'emploi

warming (heating should be almost
undetectable).
 The optimum heat output is only reached when
the socks, boots or soles are dry.
 Never used the heatable sock and the heatable
insole together; this can result in too much heat -
risk of burning!
FU N C TI O N D E S C R I P TI O N
PowerSock ic (without remote control)
The PowerSock ic battery packs have two
operating modes: POWER OFF – IN USE. They
are indicated with the heating level display on the
PowerSock ic battery packs. The number of
illuminated LEDs corresponds to the selected heat
setting.
PowerSock rc (with remote control)
The PowerSock rc battery packs have three
operating modes: POWER OFF – STANDBY – IN
USE. They are indicated with the heating level
display on the PowerSock rc battery packs and the
remote control. The number of illuminated LEDs
corresponds to the selected heat setting.

POWER OFF:

 The PowerSock battery packs are completely
turned off and the heat setting display (Fig. 1.2) is
permanently off.
 They can only be turned on by using the + / -
control buttons (Fig. 1.3) of the PowerSock
battery pack.
Note:
If the PowerSock battery packs are not used for 24
hours, they automatically switch into POWER-OFF
mode.
IN USE:
 The PowerSock battery packs supply the
– 23 –