Safety Instructions - RedHotDot POWERDUCTION 50 LG Mode D'emploi

SAFETY INSTRUCTIONS

This manual contains safety and operating instructions, to be followed for your
safety. Please read it carefully before using the device for the first time and keep it in
a safe place for future reference. Read and un- derstand the following safety
recommendations before using or servi- cing the unit. Any change or servicing that
is not specified in the instruc- tion manual must not be undertaken. The
manufacturer is not liable for any injury or damage caused due to non-compliance
with the instruc- tions featured in this manual . If there is any issue or uncertainty,
please consult a qualified individual to operate the equipment correctly. This
machine should only be used for operations comprised within the limits indicated on
the machine and in the instruction manual. The operator must observe the safety
precautions. In case of inedaquate or unsafe use, the manufacturer cannot be held
liable for damage or injury. Any other uses not specified in this manual is forbidden,
and possibly dan- gerous.The product is semi automatic and requires the presence of
an operator.
This unit can be used by children aged 8 or over and by people with reduced
physical, sensory or mental capabilities or lack of experience or knowledge, if they
are properly monitored or if instructions for using the equipment safely have been
read and risks made aware of. Children must not play with the product. Cleaning and
maintenance should not be performed by an unsupervised
child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
- Do not use the device in an explosive atmosphere.
- Keep gas cannisters or other pressurised gas containers away from the induction
heating machine.
Warning, heat and flame risk.
- Do not overheat parts and adhesives.
- Be wary of fire, keep a fire extinguisher is in the vicinity.
- Do not position the machine on, or near flammable surfaces.
- Do not position the machine near flammable materials.
Warning ! Very hot surface. Risk of burns.
- The parts and pieces that have just been heated are hot and may cause burns when
manipulated.
- Do not touch any hot parts with your hands.
- Wait for the parts and pieces to cool down before handling them.
- Check that jewellery (such as wedding rings) or other metal pieces do not get close
to the induction heating machine or the inductor when switched on.
- Remove any jewellery or any metal object from yourself before using this machine
- People with metal implants should not use this machine.
- In case of burns, rinse with water abundantly and see a medical doctor as soon as
possible.
Dangerosity of the gas fumes
- Keep the head away from the fumes, do not inhale.
- If working inside, ventilate the area or use a fume extractor to evacuate the gases
and fumes.
- Induction heating of certain materials such as adhesives and flux can generate
fumes and gases. Breathing these fumes and gases can be dangerous for your health.
For example, heating urethane generates a gas : hydrogen cyanide, potentially mortal
POWERDUCTION 50 LG
19
EN