Samsung RF323TE Série Guide D'utilisation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Do not adjust a bin full of food. Remove
the food first.
CAUTION
To remove dust from the bins : Remove the guard
and wash in water.
2. Tempered Glass shelves
To remove - Tilt up the front of the shelf in the
direction shown ( 1 ) and lift it up vertically ( 2 ).
Pull the shelf out.
To relocate - Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired
height. Then lower the front of the shelf so that the
hooks can drop into the slots.
The Tempered Glass shelves are heavy.
CAUTION
2
Use special care when removing them.
3. Vegetable & Fruit Drawers
• Door Bins
Before removing the drawer, please remove door
bins first as below.
To remove
• Simply lift the bin up and pull straight out.
DA68-02603A-08.indb 19
1
English - 19
• Tilt up the front of the drawer and pull straight
out, and pull out the drawer after moving
slightly in the direction of the arrow.
To re-install
• Insert the drawer into the frame rails and push
back into place.
• Slide bin in above the desired location and
push down until it stops.
The drawers need to be removed before
the glass shelf above them can be lifted
CAUTION
out.
4. Flex Zone
To remove the Flex
Zone – Pull the pantry
out to full extension.
Tilt up the front side
of the pantry and pull
straight out.
To relocate the Flex Zone – Push the rails to the
back of the refrigerator. Place the drawer onto the
rails and slide the pantry back until it is in place.
To remove the divider – Pull the pantry
completely out to full extension and raise the front
side of the divider to unhook it from the rear wall
of the pantry, then lift the divider out.
To relocate the divider - Hook the back of the
divider over the rear wall of the pantry and push
the divider down.
15. 2. 13.
3:15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rf323tedbsr

Table des Matières