Know Your Product; Symbols On The Product; Residual Risks - Ryobi RY18PCA Mode D'emploi

no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. Have the product serviced by an authorised
service centre only. When servicing, use only original
replacement parts.
■ Turn off the product and remove the battery pack
before conducting any maintenance or cleaning work.
■ You may only make adjustments or repairs described
in this manual. For other repairs, contact an authorised
service centre.
■ Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. Any part that is
damaged should be properly repaired or replaced by an
authorised service centre.
■ Bring the product to an authorised service centre to
replace damaged or unreadable labels.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■ injury caused by vibration
– Hold the product by the designated handles, and
restrict working time and exposure.
■ injury caused by exposure to noise
– Wear hearing protection, and limit exposure.
■ injury caused by flying debris
– Wear eye protection at all times.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching of
the fi ngers, usually apparent upon exposure to cold. Hereditary
factors, exposure to cold and dampness, diet, smoking, and
work practices are all thought to contribute to the development
of these symptoms. There are measures that can be taken by
the operator to possibly reduce the effects of vibration:
4 | English
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure that you take regular breaks.

KNOW YOUR PRODUCT

See page 140.
Parts
1. Lock-out trigger
2. Trigger
3. Charger
4. Battery latch
5. Battery
6. Wheel
7. Easy brush replacement latch
8. Wire brush
9. Telescoping latch
10. Knob
11. Handle

SYMBOLS ON THE PRODUCT

Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear eye protection.
Wear ear protection.
Wear protective gloves.
Wear non-slip safety footwear when
using the product.
Do not expose the product to rain or
damp condition.
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.