Power Supply - auna KrissKross Mode D'emploi

PROGRAM
Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play in any order. Be sure to
press the "STOP" button before use.
• Press the "MODE" button, the display will show "P01" and flash.
• Select desired track by using the "SKIP +" or "SKIP -" button.
• Press the "MODE" button again to confirm desired track into the program memory.
• Repeat step 2 and 3 to enter additional tracks into the program memory.
• When all the desired tracks have been programmed, press the "PLAY / PAUSE" button to play the disc
in the order you have programmed.
• Press the "STOP" button twice to terminate programmed playback.
MODE
Press the „MODE" button before or during playing CD/MP3 disc, each press switches the mode function as
follows:
1. REPEAT 1
2. REPEAT ( *MP3 ONLY)
3. REPEAT ALL
4. RANDOM
5. NORMAL PLAYBACK
AC POWER
You can power your portable system by plugging the detachable AC power cord into the AC inlet at the back
of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance matches your
local voltage. Make sure that the AC power cord is fully inserted into the appliance.
BATTERY POWER
Insert 8 x "C" size batteries into the battery compartment. Be sure that the batteries are inserted correctly
to avoid damage to the appliance. Always remove the batteries when appliance will not be used for a long
period of time, as this will cause leakage to the batteries and subsequently damage to your set.
Notes:
• Use batteries of the same type. Never use different types of batteries together.
• To use the appliance with batteries, disconnect the AC power cord from it.
12

Power Supply