Dustbane Hurricane 890 XTT Manuel D'opération page 25

until the red LED corresponding to CHEM-DOSE comes on. To vary the quantity
MICROFIBRE with microfibre disk. The LED corresponding to the operating mode
of solution, you must first disable the programmes (STANDARD, AUTOMATIC,
selected (BRUSH-PAD, or MICROFIBRE) lights up.
ECONOMY) by pressing the button (fig. A, ref. 3). The quantity of solution can
• Select the most suitable pressure for the head on the floor according to the type of
now be adjusted using the buttons (fig. A, ref. 2) and the value set appears on the
washing to be performed using the buttons (fig. A, ref. 7).
display (fig. A, ref. 6). Once the quantity of solution has been set, the most
• Select the most suitable flow according to the type of washing to be performed using
suitable type of solution flow must be selected (STANDARD, AUTOMATIC,
the button (fig. A, ref. 3). There are five options
ECONOMY) using the button (fig. A, ref. 3). To disable the solution tank pump,
hold the button (fig. A, ref. 3) down for at least five seconds until the LED
1 STANDARD, the solution flow can be modified using the buttons (fig. A, ref. 2)
corresponding to CHEM-DOSE goes out.
(STANDARD MACHINE ONLY)
5 CHEM-DOSE MICRO SCRUB / ECS MACHINE enables the solution tank pump
2 AUTOMATIC, the solution flow is set by the machine according to the speed
(OPTIONAL). To enter CHEM-DOSE mode, hold the button (fig. A, ref. 3) down
(STANDARD MACHINE ONLY).
until the red LED corresponding to CHEM-DOSE comes on. To vary the quantity
3 ECONOMY, the solution flow is fixed at the lowest level (STANDARD MACHINE
of solution, you must first disable the programmes (STANDARD, AUTOMATIC,
ONLY).
ECONOMY) by pressing the button (fig. A, ref. 3). The quantity of solution can
4 CHEM-DOSE STANDARD
now be adjusted using the buttons (fig. A, ref. 2) and the value set appears on the
(OPTIONAL). To enter CHEM-DOSE mode, hold the button (fig. A, ref. 3) down
display (fig. A, ref. 6). Once the quantity of solution has been set, for BRUSH-PAD
until the red LED corresponding to CHEM-DOSE comes on. To vary the quantity
mode only, the most suitable type of solution flow must be selected (STANDARD,
of solution, you must first disable the programmes (STANDARD, AUTOMATIC,
AUTOMATIC, ECONOMY) using the button (fig. A, ref. 3). When using CHEM-
ECONOMY) by pressing the button (fig. A, ref. 3). The quantity of solution can
DOSE in MICROFIBRE mode, you cannot use the STANDARD, AUTOMATIC and
now be adjusted using the buttons (fig. A, ref. 2) and the value set appears on the
ECONOMY programmes. To vary the flow, use the buttons (fig. A, ref. 2) only. To
display (fig. A, ref. 6). Once the quantity of solution has been set, the most
disable the solution tank pump, hold the button (fig. A, ref. 3) down for at least five
suitable type of solution flow must be selected (STANDARD, AUTOMATIC,
seconds until the LED corresponding to CHEM-DOSE goes out.
ECONOMY) using the button (fig. A, ref. 3). To disable the solution tank pump,
6 MICROFIBRE, the solution flow can be varied using the buttons (fig. A, ref. 2)
hold the button (fig. A, ref. 3) down for at least five seconds until the LED
(MICRO SCRUB / ECS MACHINE ONLY)
corresponding to CHEM-DOSE goes out.
5 CHEM-DOSE MICRO SCRUB / ECS MACHINE enables the solution tank pump
• Start cleaning, manoeuvring with the hands on the steering wheel (fig. B, ref. 9) and
(OPTIONAL). To enter CHEM-DOSE mode, hold the button (fig. A, ref. 3) down
moving the machine forwards or backwards by pressing the pedal (fig. B, ref. 7).
until the red LED corresponding to CHEM-DOSE comes on. To vary the quantity
• The working speed can be set using the maximum speed regulator (fig. A, ref. 13).
of solution, you must first disable the programmes (STANDARD, AUTOMATIC,
ECONOMY) by pressing the button (fig. A, ref. 3). The quantity of solution can
• Models with roller brushes: empty the debris bin (fig. O, ref. 5) by extracting it
now be adjusted using the buttons (fig. A, ref. 2) and the value set appears on the
sideways. Empty the debris and wash.
display (fig. A, ref. 6). Once the quantity of solution has been set, for BRUSH-PAD
mode only, the most suitable type of solution flow must be selected (STANDARD,
AUTOMATIC, ECONOMY) using the button (fig. A, ref. 3). When using CHEM-
DOSE in MICROFIBRE mode, you cannot use the STANDARD, AUTOMATIC and
To avoid damaging the surface of the floor to be treated, avoid rotating the
ECONOMY programmes. To vary the flow, use the buttons (fig. A, ref. 2) only. To
brushes/pads/microfibre disks with the machine stationary.
disable the solution tank pump, hold the button (fig. A, ref. 3) down for at least five
seconds until the LED corresponding to CHEM-DOSE goes out.
Stopping:
6 MICROFIBRE, the solution flow can be varied using the buttons (fig. A, ref. 2)
(MICRO SCRUB / ECS MACHINE ONLY)
•
Release the pedal (fig. B, ref. 7)
•
Start cleaning, manoeuvring with the hands on the steering wheel (fig. B, ref. 9) and
moving the machine forwards or backwards by pressing the pedal (fig. B, ref. 7).
• The working speed can be set using the maximum speed regulator (fig. A, ref. 13).
• Models with roller brushes: empty the debris bin (fig. O, ref. 5) by extracting it
sideways. Empty the debris and wash.
To avoid damaging the surface of the floor to be treated, avoid rotating the
brushes/pads/microfibre disks with the machine stationary.
Stopping:
• Release the pedal (fig. B, ref. 7)
MACHINE, enables the solution tank
    IMPORTANT
    IMPORTANT
pump
ENGLISH
17
ENGLISH
17
17