Festo CMMO-­ST DION Série Description Et Mode D'emploi page 23

CMMO­ST-...-DION/DIOP
Versions
This documentation refers to the following version of motor controller:
– Firmware: V 1.2.x and higher
– FCT plug-in: CMMO-ST V 1.2.x and higher
Firmware What's new?
V 1.0.x and The motor controller supports
higher – the positioning system for EPCO electric cylinders
– Festo actuators with stepper motor EMMS-ST
– user-defined actuators
V 1.1.2 and Advanced parameter settings for positioning systems via
higher web browser
V 1.2.1 and The motor controller supports additional positioning
higher systems, such as:
– Toothed belt axis ELGR
– Electric semi-rotary drive ERMO
Tab. 2 Software versions
The hardware version, firmware version and serial number are displayed with an active
online connection:
è FCT configuration software ("Controller" page and "Online/version" window)
è "Diagnostics" page of the integrated web server
If an online connection is currently unavailable, information relating to the most recent
connection will be displayed.
Additional product data, e.g. revision è Product labelling of the motor controller.
Note
Before using a newer firmware version:
• Check whether a newer corresponding version of the FCT plug-in or user documenta­
tion is available è www.festo.com/sp.
Festo – GDPC-CMMO­ST-EA-S1-Z6 – 2017-05d – English
Which FCT plug-in?
CMMO-ST V 1.0.0 and
higher
CMMO-ST V 1.1.0 and
higher
CMMO-ST V 1.2.0 and
higher
23