Installation And Putting Into Operation; Scope Of Delivery - Mettler Toledo Density Determination Kit Mode D'emploi

General safety information
This density determination kit complies with current industry standards and the recognized safety regulations;
however, it can constitute a hazard in use. In the event of problems, please contact a METTLER TOLEDO
representative.
Always operate and use your instrument only in accordance with the instructions contained in this manual. The
instructions for setting up your new instrument must be strictly observed.
If the instrument is not used according to these Operating Instructions, protection of the instrument may be
impaired and METTLER TOLEDO assumes no liability.
Staff safety
These operating instructions must be read and understood before using the density determination kit. These
operating instructions must be retained for future reference.
The density determination kit must not be altered or modified in any way. Only use METTLER TOLEDO original spare
parts and accessories.

3 Installation and Putting into Operation

3.1 Scope of delivery

1
6
8
No. Designation
1 Platform
2 Compensation weight small,
white for 0.1 mg
3 Compensation weight large,
chrome steel for 1 mg
4 Bracket
5 Screw
6 Glass beaker ø 60 mm
7 Glass beaker ø 80 mm
Density Determination Kit
2
3
7
10
9
Part No.
-
-
-
-
-
00238166
00238167
4
5
11
No. Designation
8 Pan
9 Holder for non floating solids
10 Holder for floating solids
11 Precision thermometer with
holder
12 Wetting agent
13 Bottom plate for XP/XPE
balances
14 Bottom plate for XS balances
Installation and Putting into Operation 5
13
14
12
Part No.
00238164
00238180
00238181
00238767
00072409
111315339
11131611