Product Safety Information - Mettler Toledo Density Determination Kit Mode D'emploi

1 Introduction
Thank you for choosing a METTLER TOLEDO density determination kit.
The density determination kit allows you to determine the density of solids and liquids.
METTLER TOLEDO is a leading manufacturer of balances for laboratory and production use as well as analytical
measuring instruments. A globally present customer service network with highly trained personnel is always
available to assist with the selection of accessories or provide advice on the optimal use of the balance.
The balance conforms to current standards and directives. It supports requirements, work techniques and protocols
as specified by all international quality assurance systems, e.g. GLP (Good Laboratory Practice), GMP (Good
Manufacturing Practice). The balance has a CE Declaration of Conformity and METTLER TOLEDO, as the
manufacturer, is certified to ISO 9001 and ISO 14001. This provides the assurance that your capital investment is
protected in the long term by high product quality and a comprehensive service package (repairs, maintenance,
servicing, adjustment service).
Use of this document
This document explains how to work with the density determination kit. It describes the procedure for performing a
density determination manually.
If you need information on operating your balance, please refer to the Operating Instructions of your balance. These
Operating Instuctions also include instructions on the density determination software.
Finding more information
2 Safety Information
2.1 Explanation of warnings and symbols
Safety notes are indicated by signal words and warning symbols and contain warnings and information about
safety issues. Ignoring safety notes can lead to personal injury, damage to the instrument, malfunctions and
erroneous results.
Signal words
Mandatory signs

2.2 Product safety information

Intended use
Your density determination kit is used to determine density of solids and liquids. Use the density determination kit
exclusively for this purpose. Any other type of use and operation beyond the limits of technical specifications without
written consent from Mettler-Toledo AG, is considered as not intended.
4 Introduction
Attention (no symbol)
for important information about the product.
(no symbol)
Note
for useful information about the product.
Gloves must be worn
It is not permitted to use the instrument in explosive atmosphere of gases, steam, fog, dust and
flammable dust (hazardous environments).
u www.mt.com/lab-accessories
u www.mt.com/xpe-precision
Density Determination Kit