Playing A Compact Disc (Cd); Repeat Function; Program Function - LENCO MC-175SI Mode D'emploi

Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone have
been paired once, they will automatically connect when the unit is on and Bluetooth is activated on the
phone. The next time you power on, the unit will automatically connect to the most recently connected
mobile phone.
Play from Bluetooth Device
After successful Bluetooth connection, press the
the tracks backwards or forwards. To pause or resume play, press
the button to disconnect all paired Bluetooth devices.

Playing a compact disc (CD)

NOTE: Never touch the laser lens inside the CD compartment. Clean the laser lens using a CD cleaner
disc if it becomes dirty.
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button repeatedly to select the CD function.
3. Press the button to open the CD door and insert a CD into the tray (with printed label side
facing up).
4. Press the button again to close the CD DOOR and the disc will rotate for a few seconds, then
play the 1st track automatically.
5. To temporarily stop playback, press the
6. Press the button to STOP play.
REVERSE/FORWARD
1. The and
speed.
2. Press the button once to skip to the beginning of the current track. Press it two or more times to
hear previous tracks on the disc.
3. Press the button to start playing the next tracks on the disc.
4. Press and hold the
track(s); When the desired track section is found, release the button and normal play will resume.
5. Press and hold the
When the desired track section is found, release the selected button and normal playback will
resume.

REPEAT FUNCTION

The CD REPEAT button may be used to repeat a single track or repeat all tracks on a compact disc.
1. Press the REPEAT button once during playback, the "REPEAT ONE" sign will appear on the LCD
display for about 2 seconds. The same track will be repeated over and over.
2. Press the REPEAT button a second time to repeat all tracks. The "REPEAT ALL" sign will appear
on the LCD display for about 2 seconds.
3. To cancel REPEAT PLAY, press the REPEAT button repeatedly until "REPEAT OFF" appears on
the LCD display for about 2 seconds.

PROGRAM FUNCTION

The Program feature may be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press and hold the PROG button for 2 seconds,
and the LCD display will show the wording "P 01" and "T 01" starts to flash.
2. Press the and
3. Press the PROG button to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the
Buttons used to jump to a different track number or hold to scan disc tracks at high
button; The current track will be rewarded towards the start of the track
button, the current track will be sped up towards the next track(s).
buttons to allocate the desired track.
button to play. Press the
button, and to resume playback, press it again.
button.
15
or button to skip
the button again. Press and hold