Clock And Timers; Setting Alarm - LENCO MC-175SI Mode D'emploi

Auto standby
When playing media from a connected device, the device automatically switches to standby if:
• No button is pressed for 10 minutes,
• No audio from a connected device for 10 minutes.
Operation
Press the POWER button once to turn ON and hold the button to power OFF the unit.
Adjusting the volume
Rotate the Volume knob clockwise to increase the volume.
Rotate the Volume knob counter-clockwise to decrease the volume.
The display will show the volume setting.
Mute function
Pressing the MUTE button on remote control will mute the volume is muted. "Volume Muted" will appear
on the display. Press this button again to cancel the mute function.

Clock and Timers

Setting the clock and date
After the unit is plugged into a mains supply or after a power failure, the time and date on the LCD
display will blink. The unit should be in standby mode to set the clock.
Press CLOCK button, "Clock Wizard" is displayed, press ENTER to confirm.
1.
2. Press /
blink.
3. Press /
4. Press /
5. Press /
6. Press /
7. Press /

Setting Alarm

Note: Check that the radio has the correct time and date before you set an alarm.
This unit may be used as an alarm clock. The CD/USB device or DAB/FM radio is activated to play at a
preset time.
1. Press POWER to switch the unit to standby mode.
2. Make sure that you have set the clock correctly.
3. Press the ALARM button to set alarm 1; press ALARM button twice to set alarm 2
4. "Alarm 1 (or 2) Wizard" is displayed. Press
5. "Alarm 1 (or 2)
Wizard
6. Press / repeatedly to set hour. Press ENTER to confirm.
7. Press / to set minute, Press ENTER to confirm.
8. Press / select the Alarm volume from 0 to 30, Press ENTER to confirm.
9. Press / to scroll to choose OFF/USB/CD/FM/DAB. Press ENTER to confirm.
10. Press / to choose the duration for the alarm. You can choose from 10 to 60 minutes. Press the
ENTER button to confirm. Use
11. The display will show the current time and Alarm 1 (or Alarm 2 or at the same time)
Warning: When alarm is set to DAB mode and there is no DAB signal, the alarm clock is silent.
- When alarm source CD is selected and there is no CD inserted, there will be no alarm sound
Note : Choose Alarm source OFF if the alarm shouldn't activate the next day
to select "24H"or "12H", Press ENTER confirm. The hour digits on the display will
to set the hour, press ENTER confirm, the minutes digits on the display will blink.
to set the minutes, press ENTER confirm, the Year digits on the display will blink.
to set the Year, press ENTER confirm, the Month digits on the display will blink.
to set the Month, press ENTER confirm, the Day digits on the display will blink.
to set the Day, press ENTER confirm, press
On time" is displayed and the hour digits for the alarm will flash.
/
/ ENTER button to select.
to select YES and press ENTER to save the alarm setting.
10
the select save "YES/NO"
/