LENCO MC-175SI Mode D'emploi page 14

2. Audio Setting
2.1. Stereo allowed:
2.2. Forced mono
2.3. System (FM system), same as DAB system setting.
3. PRESET:
3.1. Preset Recall (Choose the Station):
Select a station and press [ENTER] to tune to the station stored in preset memory.
3.2. Preset Store (Save a Station):
You may store your preferred FM stations to the preset station memories. There are 50
memory presets in your radio. Presets are remembered by your radio in the event of a
power failure.
The procedure for setting presets and using them to tune stations is the same for DAB
modes:
In FM mode, select the desired wave band. Then press [MENU] and use
select [Preset store]. Now Press [
[ENTER] to select the preset number under which you will store the station. Press
[ENTER] to confirm.
Bluetooth Mode
You must follow several steps to connect your mobile phone:
1. Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
2. Press POWER button to turn on the unit, then press the SOURCE button repeatedly until the
"Bluetooth searching..." indicator appears on the LCD display. It will be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named "Lenco MC-175SI".
4. Select "Lenco MC-175SI" on your phone and it present the option to connect or not. Please
connect to it using the password "0000" (if any). When you are successfully connected, the
Bluetooth indicator "Bluetooth connected" appears on the LCD display.
/ ] to view the stored stations, and then press
14
and to