LENCO MC-175SI Mode D'emploi page 12

DRC (Dynamic Range Control)
Dynamic Range Control (also known as DRC) is a technology used to help make quieter sounds
easier to hear in a noisy environment.
1. In DAB menu, press the [
display "*" to the top right.
2. DRC OFF - DRC is switched off, broadcast DRC will be ignored. DRC LOW - DRC level is
set to 1/2 that sent by broadcaster.
DRC HIGH - DRC level is used as sent by broadcaster.
Press MENU to confirm the setting. The display will return to normal.
Prune (To Remove Stations That are Listed But Unavailable)
In DAB menu, press [
Prune option.
System (DAB)
In DAB menu, press [
go to the system settings.
1. Language
Press [ENTER] to go to language selection; the default source language is English, the
selected language will have "*" displayed at the top right. Users may choose between
English, French, Italian, Deutsch, Polish, Nederlands, Espanol
2. Factory Reset
Press [ENTER] to perform a factory reset. If you wish to perform the reset operation, push [
] until "YES" is highlighted on the display and press [ENTER]. A full reset of your
] or [
radio will be performed. All presets and station lists will be erased.
3. SW Version
Press [ENTER] to view DAB software version. Press Menu to stop displaying the software
version.
*If there are no operations after 30 seconds, the display will return to normal.
Preset
1. Preset Recall
In DAB menu, press [
the stored in preset memory. Alternately, press a number on the remote to open the preset
directly
] button to select "DRC", press the [ENTER] button to
] or [
] to display the "Prune" submenu, press [ENTER] to select the
] or [
] to show the "SYSTEM" submenu, press the [ENTER] button to
] or [
] station select "Preset Recall", then press [ENTER] to tune to
] or [
12