Technical Data; General Technical Data - Seca 675 Mode D'emploi

11.TECHNICAL DATA

11.1 General technical data

Dimensions of scale
• Depth
• Width
• Height
Dimensions of weighing platform
• Depth
• Width
• Height
Net weight
Temperature range
• Operation
• Storage
• Transport
Air pressure
• Operation
• Storage
• Transport
Humidity
• Operation
• Storage
• Transport
The current content of the calibration counter
flashes in the display for a few seconds.
3. Compare the content of the calibration counter out-
put with the number given on the calibration coun-
ter sticker.
Both numbers have to match for the calibration to be
valid. If the sticker and the calibration counter do not
match, the scale must be recalibrated. Please contact
your service partner or seca service. Once the scale has
been recalibrated, a new, updated calibration counter
sticker is used to identify the status of the calibration
counter. The person authorized to perform the recali-
bration secures this sticker with an additional seal. The
calibration counter sticker can be ordered from seca
service.
General technical data
seca 675
+10 °C to +40 °C / +50 °F to 104 °F
-10 °C to +65 °C / +14 °F to 149 °F
-10 °C to +65 °C / +14 °F to 149 °F
30 % - 80 % no condensation
0 % - 95 % no condensation
0 % - 95 % no condensation
Technical data • 79
English
965 mm
890 mm
65 mm
965 mm
800 mm
65 mm
approx. 26 kg
700-1060 hPa
700-1060 hPa
700-1060 hPa