JVC KD-ADV6580 Manuel D'instructions page 56

Symptom
• Disc cannot be played back.
• Noise is generated.
• Tracks cannot play back as you have
intended them to play.
• Longer readout time is required.
• No sound can be heard when picture is
displayed while playing a MPEG Video
file.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear
alternately on the display.
• Correct characters are not displayed
(e.g. album name).
• Noise is generated.
• "READING" keeps flashing on the
display.
• "NO FILE" appears on the display.
• Tracks/folders are not played back in
the order you have intended.
• "NOT SUPPORT" appears on the display
and track skips.
• "READ FAILED" appears on the display.
1
* Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA/WAV track.
56
Remedy/Cause
• Change the disc.
• Record the tracks using a compliant application in the
appropriate discs (see page 4).
• Add the extension code <.mpg>, <.mpeg>, <.mp3>,
<.wma>, or <.wav> to the file names.
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Readout time varies due to the complexity of the folder/file
configuration. Do not use too many hierarchies and folders.
Record the audio track using MPEG1 Audio Layer 2 as the
audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused by
how the tracks are recorded.
Insert a disc that contains tracks of appropriate formats.
This unit can only display letters (upper case), numbers, and
a limited number of symbols. (See page 44.)
The track played back is not an MP3/WMA/WAV track. Skip
to another file. (Do not add the extension code <.mp3>,
<.wma>, or <.wav> to non-MP3/WMA/WAV tracks.)
• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly while
"READING" is displayed on the display.
Selected folder is an empty folder *
that contains MP3/WMA/WAV tracks.
The playback order is determined by the write-in time
stamp. The first track/folder written into the USB device will
be the first track/folder for playback.
Check whether the track is a playable file format.
The connected USB device may be malfunctioning, or may
not have been formatted correctly. The files included in the
USB device are corrupted.
1
. Select another folder