Cleaning And Changing Air Filter; Preparations; Cleaning Appliance - exonda M41 Mode D'emploi

5

Cleaning and changing air filter

Figure 04
Figure 05
5.1

Preparations

WARNING – Electric shock hazard:
•
Before cleaning and changing the air filter, switch off the appliance
at the ON/OFF switch 
•
Protect the appliance from splashing and do not use a wet cloth for
cleaning.
•
Only ever dry clean the
of liquids.
•
Do not introduce objects into openings in the appliance. Do not use
sharp objects, e.g. a tail comb, to remove dust or foreign bodies.
Allow appliance to cool down.
1st
Switch off appliance at the
2nd
RISK OF FIRE / damage to the Hood dryer, model M41:
•
Do not use benzine, paint thinners or other highly flammable
substances for cleaning.
•
Do not use harsh cleaning agents or scouring products.
5.2

Cleaning appliance

The housing is made of sturdy materials that are easy to clean. You will avoid
disco-louration if you immediately remove traces of colouring products from the
plastic.
5.2.1. Appliance surfaces
Follow safety instructions as described in section 5.1.
1st
Only clean appliance surfaces with a soft cloth that has been slightly
2nd
moistened in water with a little washing-up liquid added and well wrung out
beforehand.
5.2.2. Air grille under the filter cover
Remove filter cover  and air filter  as described in section 5.3.
1st
Only ever dry clean the air grille ① with a brush or use a vacuum cleaner
2nd
with a brush attachment..
Fit filter cover  as described in section 5.3.
3rd
5.2.3. Hairdryer dome and air grille under the hairdryer dome
Remove hairdryer dome  as described in section 5.4 and clean outside and
1.
in with a moistened cloth.
Only ever dry clean the air grille ① with a brush or use a vacuum cleaner
2.
with a brush attachment.
Fit hairdryer dome  as described in section 5.4.
3.
52
Figure 04
and remove the plug  .
air grille ① (see Figure 05), without the use
ON/OFF switch  and remove
Figure 05
GB
plug  .