Operation; Connecting To Mains / Disconnecting; Positioning Hood Dryer, Model M41 For Customer - exonda M41 Mode D'emploi

4

Operation

Figure 01
① Power cord
② Rating plate
Figure 02
4.1
The socket outlet with earthing contact must have at least 10 ampere protection.
We recommend that the wiring in your salon is protected with a residual current
circuit breaker (RCCB) fitted by your electrician.
4.1.1
Check the
1st
Turn the filter cover  to the left (anticlockwise) and
2nd
Check that the mains voltage corresponds to the information on the.
3rd
Rating plate
plate ②
Put on the
4th
go.
Move the pedestal device to the place where treatment is to be performed.
5th
Insert
6th
Insert
with earthing contact
Arrange
7th
4.1.2
To avoid damage to the Hood dryer, model M41
Do not pull on
1st
Switch off appliance at
2nd
Disconnect from mains by gripping and pulling out
3rd
Wind up
4th
4.2
Position appliance:
Adjust appliance to required height.
1st
•
Tilt the pedestal adapter  forwards into the working position.
•
Position the appliance centrally over the forehead/nape of the neck so that
the
•
The face and eyes must be outside the head
•
The hair and all curlers must be completely under the
•
The distance between the customer and the
same on all sides.
To ensure customer comfort
•
For sensitive customers turn down the temperature and airflow using the
temperature control 
•
Inform your customer that she can stop treatment by pushing up the
piece 

Connecting to mains / Disconnecting

Connecting to mains
plug 
and power cord ①
NOTE – Power supply voltage
The power supply voltage of the appliance can be found on the rating
plate  under the filter cover ②
filter cover  and turn it to the right (clockwise) as far as it will
plug  of pedestal version in a socket.
plug  of the wall-mounted version in a properly earthed socket outlet
power cord ① so no-one can trip over it.
Disconnecting from mains
power cord ①.
ON/OFF switch  .
holder  .
power cord ① on

Positioning Hood dryer, model M41 for customer

Figure 02
head piece 
completely covers the customer's hair.
and the
using both hands and moving out of the appliance to the front.
50
Figure 01
for damage.
:
remove.
plug  .
piece  .
head piece  .
hairdryer dome 
airflow setting control 
.
GB
rating
should be the
head