Connector For Update-Stick - Lenz Digital plus LZV200 Manuel D'utilisation

39
Further information on the switch decoders and the feedback bus can
E
be found in the respective operating manuals. You can order
operating manuals directly from us (send a stamped addressed C5
envelope) or download them from our web page
https://www.lenz-elektronik.de/download.php

5.7 Connector for update-stick

This socket is used exclusively for connecting an update stick and is
not suitable for use with a computer or a commercially available USB
stick.
For the LZV200 we will supply you with a USB stick containing the
current version of your LZV200. This stick can only be used with your
central unit. Another device will not accept this stick. So please save
the update stick carefully. This ensures that you will have an
executable backup in the future.
If an update for the LZV200 is available, you can order a new update
stick from us. With this new stick you carry out the update.
If problems occur after an update you can use the supplied stick to
restore the delivery version at any time.
5.7.1 Using the update stick
First disconnect the power supply from the LZV200. The easiest way
is to disconnect the pluggable screw terminal U,V,J,K from the
LZV200.
Now insert the update stick into the "update" port.