Assembly - Skywalker Trampolines SWTC15 Manuel De L'utilisateur

ASSEMBLY

READ THIS BEFORE YOU BEGIN
• You'll probably need at least 2 adults and 2 hours to assemble your trampoline (of course, that depends on what
model you have, and whether or not you're secretly a superhero).
• We've provided a Phillip's screw driver and two adjustable wrenches to help with assembly, but you're more than
welcome to use your own tools. Many find that using a power drill and a rubber mallet makes things easier.
• Use gloves to protect your hands from pinch points during assembly. Plus, it's an up-and-coming fashion trend.
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3).
• The assembly steps are written in a specific order, and if you don't follow them exactly... you may end up having to
start all over again. We promise we won't say, "I told you so" but really... we told you so.
• Most importantly... YOU'VE GOT THIS. YOU'RE THE BEST TRAMPOLINE ASSEMBLER AROUND. This may not be the
easiest thing you've ever done... but it will be worth it. Trust us.
And if you're a visual learner, check out our assembly videos!
STEP 1
Register your trampoline! For info on warranty registration, see page 2.
STEP 2
T-joint (pre-
1
installed) (x6)
(2)
Holes face
the ground
Socket (pre-
2
18
installed) (x6)
(18)
Insert one top tube (18) with T-joint (1) into one
top tube with socket (2). Make sure the holes
in the tubes face the ground! Now repeat this
step for the remaining top tubes with T-joints
and top tubes with sockets. Make sure the
Top Tube (x12)
T-joints and sockets are alternating!
(1)
(18)
Holes face
the ground
7
Visit: youtube.com/c/SkywalkerTrampolines
T-joint
Socket