Skywalker Trampolines SWTC15 Manuel De L'utilisateur page 11

STEP 9
8
Springs (x1)
STEP 10
8
Springs (x4)
(8)
T-joint
Now, repeat step 8 on the other side of the trampoline. Make sure to count
the exact number of V-rings and frame holes so each one corresponds!
You now have attached 2 V-rings to the frame holes using 2 springs.
Enclosure door
Place a spring into the V-ring just left of the T-joint, and stretch the spring
until it reaches the frame hole just left of the T-joint.
Now, repeat this step on the other side of the trampoline. You now have
attached 6 V-rings to the frame holes using 6 springs.
Enclosure door
11
T-joint
(8)