Storage Conditions - Halyard On-Q Pump Mode D'emploi

Note:
Latex is not in fluid pathway or in contact with human. Refer to
Latex Sensitivity Technical Bulletin at www.halyardhealth.com.
Caution:
Do not underfill pump.
• Filling the pump less than the labeled fill volume may significantly increase the flow rate.
• Do not exceed maximum fill volume.
Table 1 – Delivery Time Information
Labeled Fill Volume
Model
Labeled Flow Rate (ml/hr)
Labeled Fill Volume (ml)
Approx. Delivery Time
hours
days
Maximum Fill Volume
Labeled Flow Rate (ml/hr)
Maximum Fill Volume (ml)
Approx. Delivery Time
hours
days
Retained Volume (ml)
Rx only
= Caution: Federal (U.S.A.) law restricts this device
to sale by or on the order of a physician.
Additional U.S and Foreign Patents may be issued and/or
pending.
*Registered Trademark or Trademark of Halyard Health, Inc. or
its affiliates. © 2015 HYH. All rights reserved.
100x1 100x2 270x2
1 2 2
100 100 270
100 50 135
4.2 2.1 5.6
1 2 2
125 125 335
134 70 210
5.6 2.9 8.7
≤4 ≤4 ≤10

Storage Conditions

Store under general warehouse conditions. Protect from light
sources and heat. Keep dry.
270x4 270x5 400x4
4 5 4
270 270 400
68 54 100
2.8 2.3 4.2
4 5 4
335 335 550
92 76 176
3.9 3.2 7.3
≤10 ≤10 ≤15
For more information, please call
+1.949.923.2400 • 1.800.448.3569
(English only) or visit www.halyardhealth.com for the
latest product information and Technical Bulletins.
To order additional Instructions for Use or
Patient Guidelines please email or call:
HalyardIrvine.ProductInquiry@hyh.com or
+1.949.923-2400.
400x5 400x6 400x8 400x10
5 6 8
400 400 400
80 67 50
3.3 2.8 2.1
5 6 8
550 550 550
118 104 79
4.9 4.3 3.3
≤15 ≤15 ≤15
10
400
40
1.7
10
550
62
2.6
≤15
7