Publicité
Les langues disponibles
Les langues disponibles
Symbols in this Manual
#
This symbol indicates where cautionary or other information is found in the manual.
Battery
1-3 Front Panel
Refer to Figure 1 and to the following numbered steps to familiarise yourself with the meter's front panel controls and
connectors.
1. Digital Display — The digital display has a 3200 counts LCD readout with 65 segments analog bar graph, auto
polarity, decimal point, "
2. Function Switch — Select the Function and Range desired.
3. COM Input Terminal — Ground input connector.
è è
4. V–
Input Terminal — Positive input connector for Volts, Ohms and Diode.
5. Range Switch (Manual Range) — "RANGE" switch is pressed to select manual ranging and to change ranges.
When "RANGE" switch is pressed once, "RANGE" annunciator on the LCD is displayed. Press "RANGE" switch
to select appropriate range to be used. Press "RANGE" switch and hold for 2 seconds to return to Autoranging.
,
" AC, DC, RANGE,
è
è
è
,
, M
or K
or
4
and Unit annunciators.
Publicité
