Iso-Tech IDM 91E Manuel D'instructions page 5

Symbols in this Manual
#
This symbol indicates where cautionary or other information is found in the manual.
Battery
1-3 Front Panel
Refer to Figure 1 and the following numbered steps to familiarize yourself with the meter's front panel controls and
connectors.
1. Digital Display — The digital display has a 3-1/2 LCD readout (maximum reading 1999) with automatic polarity,
overrange and low battery indicators.
2. Rotary Switch — Select the Function and Range desired.
3. COM Input Terminal — Ground input connector.
è è
4. V Input Terminal — Positive input connector for Volts, Ohms and Diode.
5. mA µA Input Terminal — Positive input connector for mA and µA measurements (up to 200mA).
6. 10A Input Terminal — Positive input connector for Amp measurements (up to 10A).
5