Removing The Product - Coway BA16-CR/CE Mode D'emploi

CLEANING AND MAINTAINING YOUR BIDET

Removing the product

1. Unplug the power cord.
2. Close the tap water supply valve.
3. Pull the product forwards holding both sides of the product as you press the
button at the right bottom of the product. The product will be separated from the
installation plate.
- Unplug the product and detach the bidet hose from the product.
- Remove MF filter and its filter fixing stopper from the product when you store the
product.
4. Place the bucket under the drain plug of product.
5. Remove the drain plug at the back of the bidet by turning it counterclockwise by 90
degrees ① and then pulling it forwards ②.
- The water will be drained out. Drain them completely.
▶ Unplug the product if it will not be used for a long time.
Tips
2
1
1
2
21
22