For Front Cleansing - Coway BA16-CR/CE Mode D'emploi

HOW TO USE

For front cleansing

Front
Sit down on the seat and press the 'Front' button on the remote control.
- The cleansing water shoots out for about 1 minute and then stops automatically.
- After cleansing water spray, the nozzle cleanses itself with sterilizing water for 3 seconds.
Press the 'Nozzle Position' button to set a water spray angle as you desire.
Press 'Front' button again to extend another 1-minute-cleansing.
You can adjust the water temperature, pressure and nozzle position.
Move
Press the 'Move' button.
- The nozzle oscillates making bigger water spray while cleansing.
Press the 'Nozzle Position' button to set a water spray angle as you desire.
Press the "Move' button again to stop nozzle movement.
Dry
Press the 'Dry' button.
- Warm air is emitted for about 2 minutes.
Lightly wipe off yourself off of yourself to speed up drying.
Press the 'Water/Dry Temp.' button to adjust air temperature.
If you press the 'Dry' button while cleansing, cleansing terminates and drying commences immediately.
Stop
Press the 'Stop' button to stop the current operations.
- All current operating functions stops.
The drying is stopped 2 seconds after the 'Stop' button is pressed.
17
18