Cleaning And Maintaining Your Bidet; Clean The Nozzles; Clean The Product Body - Coway BA16-CR/CE Mode D'emploi

CLEANING AND MAINTAINING YOUR BIDET

Clean the nozzles

1. Press the 'Nozzle cleaning' button.
- The front cleansing nozzle is protruded as nozzle cleansing water sprays out. The nozzle
gets cleaned.
2. Press the 'Nozzle cleaning' button again.
- The front cleansing nozzle retracts back and the rear cleansing nozzle is protruded as
nozzle cleansing water sprays out. The nozzle gets cleaned.
3. If you press the 'Stop' or 'Nozzle cleaning' button. after cleaning the rear
cleansing nozzle, the rear cleansing nozzle retracts back as nozzle cleansing
water sprays out.

Clean the product body

Apply natural detergent on a soft cloth or sponge to clean the bidet.
- Failing to do so may result in deformation or product damage.
Unplug the product when cleaning the nozzle duct.
Dry out the nozzle duct completely after cleaning it with water.
Do not spray water directly onto the product.
Do not use solvents such as thinners or benzene. Do not use rough brushes and
detergents which contains polishing powder to clean the bidet.
Tips
Do not apply excessive force onto nozzle when cleaning. Hold it gently.