Connecting The Bknw-25 To External Devices; Connectable Digital Vcr Models; Connectable Dv/Dvcam Camcorder Models; Dv/Dvcam Camcorder Settings - Sony BKNW-25 Mode D'emploi

Connecting the BKNW-25 to
External Devices
Connectable digital
VCR models
The following VCRs are equipped
with an SDI input connector and can
be connected to the BKNW-25.
— DNW-A220/A220P
— DNW-A75/A75P
— DNW-A25/A25P
Note
Other digital VCRs can also be used if
they are connected to the editing
control unit.
Connectable DV/DVCAM
camcorder models
The following models are equipped
with a LANC l connector and DV
connector and can be connected to the
BKNW-25.
— DCR-VX1000/VX1000E
— DCR-VX9000/VX9000E
— DCR-PC7/PC7E
— DCR-TRV9/TRV9E
— DCR-PC10/PC10E
— DCR-PC1/PC1E
— DSR-PD1/PD1P
— DSR-200A/200AP
Note
The following symptoms are due to
the specifications of the camcorder
and are not malfunctions.
• The tape speed of the camcorder may
be different from that set by the VCR
or editing control unit.
• Changing the playback mode of the
DV/DVCAM camcorder may cause
the synchronization to fail, or noise
to occur in the audio when the
camcorder is in variable-speed play
mode.
• Noise in audio or video dropouts
may be observed when playing
damaged or dirty tape.
DV/DVCAM camcorder
settings
Before the start of editing, set the
connected camcorder as follows.
Power switch: Set it to VIDEO or
PLAY.
Video/audio input/output switch:
Set it to OUTPUT (when the
video/audio output connector is
also used as the video/audio input
connector).
7(GB)