Cancelling A Programme - AEG L 63470 FL Notice D'utilisation

14 www.aeg.com
option, the indicator of the set
option comes on.
10.6 Starting a programme
without the delay start
Press button Start/Pauze - Départ/Pause
to start the programme.
The relevant indicator stops to flash and
stays on.
The programme starts, the door is
locked. The display show the indicator
.
10.7 Behaviour of the
appliance
10.8 Starting a programme
with the delay start
1. Press button Startuitstel - Départ
Différé again and again until the
display shows the delay you want to
set.
2. Press button Start/Pauze - Départ/
Pause.
The appliance starts the countdown of
the delay start.
When the countdown is completed, the
programme starts automatically.
If you set something
incorrect, the display shows
the message Err.
The drain pump can operate
for a short time when the
appliance fills water.
After approximately 15
minutes from the start of the
programme:
• The appliance adjusts
automatically the cycle
time to the laundry you
have put in the drum to
have perfect washing
results in the minimum
necessary time.
• The display shows the
new time value.
Before you press button
Start/Pauze - Départ/Pause
to start the appliance, you
can cancel or change the set
of the delay start.
10.9 Cancelling the delay start
To cancel the delay start:
1. Press button Start/Pauze - Départ/
Pause to set the appliance to pause.
The related indicator flashes.
2. Press button Startuitstel - Départ
Différé repeatedly until the display
shows .
3. Press button Start/Pauze - Départ/
Pause again to start the programme
immediately.
10.10 Interrupting a
programme and changing a
function
You can change only some options
before they operate.
1. Press button Start/Pauze - Départ/
Pause.
The related indicator flashes.
2. Change the function set.
3. Press the button Start/Pauze -
Départ/Pause again.
The programme continues.

10.11 Cancelling a programme

1. Turn the programme knob to
cancel the programme.
2. Turn again the programme knob to a
new washing programme. At this
time you can also set the available
functions.
Before starting the new
programme the appliance
drains the water. Make sure
that the detergent is still in
the detergent compartment,
if not fill the detergent
again.
to