Philips TT3003 Mode D'emploi page 41

Problem
The 'ready to flash'
light does not go on
when I place the body
attachment on my
skin, but the cooling
fan works.
The 'ready to flash'
light is green but
the appliance does
not produce a flash
when I press the flash
button.
The appliance
becomes warm
during use.
Possible cause
The overheat
protection has
been activated.
The appliance
needs to be
reset.
This is normal.
English
Solution
When the overheat
protection has been
activated, the fan still works.
Do not switch off the
appliance and let it cool
down for approx. 15 minutes
before you continue to use
it. If the 'ready to flash' light
still does not go on when
you place the appliance
on the skin, contact the
Consumer Care Centre in
your country, your Philips
dealer or a Philips service
centre.
To reset the appliance,
switch off the appliance
and switch it on again. If the
'ready to flash' light is green
but the appliance still does
not produce a flash when
you press the flash button,
contact the Consumer Care
Centre in your country, your
Philips dealer or a Philips
service centre.
No action required.
41