Philips TT3003 Mode D'emploi page 33

Never clean the appliance or any of its parts under
the tap or in the dishwasher.
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as petrol or acetone to
clean the appliance.
Never scratch the light exit window or the metallic
surface inside the body attachment.
Note: Make sure that the contact switches of the safety
ring do not get congested with dirt.
Note: Stop using the appliance when it is no longer
possible to clean the light exit window or the body
attachment.
1 Switch off the appliance, unplug it and let it
cool down.
Note: The light exit window becomes hot during use.
Make sure it has cooled down before you clean it.
2 To remove the body attachment, put your
fingers in the recesses at the top and bottom
and pull gently. The attachment should come
off easily.
3 Moisten the soft cloth supplied with the
appliance with a few drops of water and use it
to clean the following parts:
- the light exit window
- the outside surface of the body attachment
- the metallic frame inside the body attachment
Note: If water does not clean effectively, use a few
drops of high-percentage alcohol to clean the parts
mentioned above.
English
33