Procopi Wewa Rectangle Notice De Montage page 68

WEVA RECTANGULAR POOLS
> >
ADVICE
Use silicon grease
or soapy water to
facilitate insertion of
the pipes.
Before connecting
the pipes, make sure
that the protective
rubber bands
intended to cover the
Torro clamps after
tightening are in
position.
68
PUMP/FILTER & MANIFOLD
Figure 43
skimmer skimmer
1 2
◗
Mount the pump on its base, then connect the assembly to the fi lter base. Ensure that
the orientation of the assembly will facilitate subsequent installation of the semi-rigid
pipes.
◗ Screw the 3-way manifold (F) onto the pump inlet. Do not forget the o-ring enclosed
in the pump pack.
◗ Screw the screwed union from the pump pack onto the pump outlet. (Do not forget
the o-ring).
◗
Cut a length of tube to size and connect it as illustrated between the pump outlet and
the 6-way valve.
Figure 44
return
waste