Environmental Parameters; Garantieinformationen; Produktspezifische Normen - Invacare Stileo H170 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
1. Clean the product by wiping down all generally accessible
surfaces.
2. Dry the parts with a cloth.
Disinfection Instructions
Information on recommended disinfectants
and methods can be found on https://vah-
online.de/en/for-users.
In Domestic Care
Method: Follow the application notes for the used
disinfectant and wipe-disinfect all accessible surfaces.
Disinfectant: Ordinary household disinfectant.
Drying: Allow the product to air-dry.
In Clinical and Long Term Care
Follow your in-house disinfection procedures and only use
the disinfectants and methods specified therein.
12 Reconditioning
This product is suitable for reuse. To recondition the product
for a new user, carry out the following actions:
Inspection
Cleaning and disinfection
For detailed information, see 11 Maintenance, page 4 .
Make sure that the user manual is handed over with the
product.
If any damage or malfunction is detected, do not reuse the
product.
13 Disposal
Be environmentally responsible and recycle this product
through your recycling facility at its end of life.
Disassemble the product and its components, so the different
materials can be separated and recycled individually.
The disposal and recycling of used products and packaging
must comply with the laws and regulations for waste handling
in each country. Contact your local waste management
company for information.
14 Technical Data (Fig. 2)
Stileo H170
290 mm
A
B
72 mm
C
300 mm
D
95 mm
E
80 mm
Ø Suction
pads
Product
0.35 kg
weight
Max. load
force
Materials*
Grab bar: ABS / Suction pads: PVC
*All product components are corrosion resistant and do not
contain natural rubber latex.
1526478-F
Stileo H171
Stileo H172
400 mm
500 mm
35 mm
75 mm
450 mm
550 mm
100 mm
93 mm
0.5 kg
0.6 kg
30 kg

14.1 Environmental Parameters

Operating Conditions
Ambient temperature
Relative humidity
Storage and Shipping Conditions
Ambient temperature
Relative humidity
1 Einleitung
Diese Gebrauchsanweisung enthält wichtige Informationen zur
Handhabung des Produkts. Lesen Sie die Gebrauchsanweisung
sorgfältig durch und befolgen Sie die Sicherheitsanweisungen,
damit eine sichere Verwendung des Produkts gewährleistet
ist.
Invacare behält sich das Recht vor, Produktspezifikationen
ohne vorherige Ankündigung abzuändern.
Vergewissern Sie sich vor dem Lesen dieses Dokuments,
dass Sie die aktuelle Fassung haben. Die jeweils aktuelle
Fassung können Sie als PDF-Datei von der Invacare-Website
herunterladen.
Wenn die gedruckte Ausführung des Dokuments für Sie
aufgrund der Schriftgröße schwer zu lesen ist, können Sie
die entsprechende PDF-Version von der Invacare-Website
herunterladen. Sie können das PDF-Dokument dann auf
dem Bildschirm so anzeigen, dass die Schriftgröße für Sie
angenehmer ist.
Bei einem ernsthaften Vorfall mit dem Produkt informieren
Sie bitte den Hersteller und die zuständige Behörde in Ihrem
Land.

2 Garantieinformationen

Wir gewähren für das Produkt eine Herstellergarantie
gemäß unseren Allgemeinen Geschäftsbedingungen für das
entsprechende Land.
Garantieansprüche können nur über den Händler geltend
gemacht werden, von dem das Produkt bezogen wurde.
3 Konformität
Qualität ist für das Unternehmen entscheidend. Alle Abläufe
sind an den Anforderungen von ISO 13485 ausgerichtet.
Dieses Produkt ist mit dem CE-Kennzeichen versehen
und erfüllt die europäische Verordnung 2017/745 über
Medizinprodukte der Klasse I. Das Markteinführungsdatum
des Produkts ist in der CE-Konformitätserklärung aufgeführt.
Wir setzen uns kontinuierlich dafür ein, die Umwelt durch
unsere Unternehmenstätigkeit sowohl direkt vor Ort als auch
weltweit möglichst wenig zu beeinträchtigen.
Wir verwenden ausschließlich REACH-konforme Materialien
und Bauteile.

3.1 Produktspezifische Normen

H171 und H172 wurden getestet und entsprechen der Norm
DIN EN 12182 (Technische Hilfen für behinderte Menschen –
Allgemeine Anforderungen und Prüfverfahren) und allen
einschlägigen Normen. H170 wurde getestet und entspricht
der Norm DIN EN 17966 (Hilfsmittel für die Körperhygiene
zur Unterstützung der Anwender – Anforderungen und
Prüfverfahren) und allen einschlägigen Normen.
Weitere Informationen zu lokalen Normen und Vorschriften
erhalten Sie bei Ihrem Invacare-Vertreter vor Ort. Die
10 - 40 °C
15% - 93%, non-condensing
0 - 40 °C
30% - 75%, non-condensing
IdeI
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Stileo h171Stileo h172

Table des Matières