Technical Data - NORAUTO 2274268 Consignes De Sécurité

2. Take the gears fixed axle from the plastic
stator and store it on the back of the
backrest.
3. Finally, insert redundant belt into cloth
cover.
4. To store a buckle,
button to release the buckle tongues.
5. Pull down the buckle cover.
6. Lift the cover in the PE board and hide
the buckle.
SEAT COVER REMOVAL
1. Set headrest in the highest position.
2. Remove the 5-point harness.
3. Remove the cover from the backrest and base.
4. First, remove the cover from the base of the headrest, then
remove the cover from the headrest.
To reattach the cover, reverse the above steps.
CAUTION: Do not use enhanced child restraint system without the
cover.
CAUTION: Check that the harness straps are not twisted and that
they are correctly inserted into the slots of the cover's straps.

TECHNICAL DATA

Overall dimensions
(millimetre)
Weight
press the straps release
Length
Width
Height 620-820
12.05 kg
580
440
2 1
580mm
440mm
EN
3
65