Varian Turbo-V 1000 ICE E Série Notice De Mode D'emploi page 64

Command : LOW SPEED (ON)
Source : PC
Destination : Inverter
02 80 30 30
STX ADDR WINDOW
Source : Inverter
Destination : PC
02 80 06
03
STX ADDR ACK ETX
Command : LOW SPEED (OFF)
Source : PC
Destination : Inverter
02 80 30 30
STX ADDR WINDOW
Source : Inverter
Destination : PC
02 80 06
03
STX ADDR ACK ETX
Command : CURRENT
Source : PC
Destination : Inverter
02 80 32 30
STX ADDR WINDOW
Source : Inverter
Destination : PC
02 80 32 30 30 30 30 30 30 2E 30 30 03 39 46
STX ADD WINDOW RD
31 31 31 03 42
WR ON ETX CRC
38 35
CRC
31 31 30 03 42
WR OF ETX CRC
F
38 35
CRC
30 30 03 38 31
RD ETX CRC
000.00 ETX CRC
Command : FREQUENCY
Source
Destination : Inverter
32 02 80
STX ADDR
Source
Destination : PC
02 80 32 30 33 30 30 30 30 30 33 38 03 38 39
STX ADD WINDOW RD
Command : ERR-CODE
Source
Destination : Inverter
33
02 80
STX ADDR
Source
Destination : PC
02 80 32 30 36 30 30 30 30 30 30 30 03 38 37
STX ADD WINDOW RD
Using the RS 485 interface, the message structure
remains identical
RS 232/422 interface, the only difference being that the
value assigned to the ADDRESS <ADDR> field in this
case can be any hex value, while for the RS 232/422
this value must be set to 80 hex.
58
TECHNICAL INFORMATION
: PC
32 30 33 30 03
WINDOW RD ETX
: Inverter
000038
: PC
32 30 36 30 03
WINDOW RD ETX
: Inverter
000000
NOTE
to the one
87-900-951-01 (B)
38 32
CRC
ETX CRC
38 37
CRC
ETX CRC
used for the