Care And Maintenance - Dura Vac VWMB508 0401 Manuel D'utilisation

CARE AND MAINTENANCE

WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM THE CONTAINER.
1. Verify that the power cord is disconnected from the outlet. (fi g. 1)
2. Disconnect the hose from the vacuum. (fi g. 2)
3. Remove the vacuum from the mounting rack.
4. Undo the latches and remove the power head from the container. (fi g. 3)
5. Clear all dirt or debris from the container and hose. (fi g. 4)
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT! Clean or change the cartridge fi lter regularly for best performance. ALWAYS USE
CARTRIDGE FILTER FOR DRY VACUUMING. If the machine is used without the cartridge fi lter,
the motor will burn out and the warranty will be voided. Always keep spare cartridge fi lters on
hand.
NOTICE! The fi lters included are made of high quality materials designed to stop small dust
particles. The cartridge fi lter should be used for dry pick-up only. A dry cartridge fi lter is necessary
to pick up dust. If the cartridge fi lter is wet, it will clog quickly and be diffi cult to clean. Handle the
fi lter carefully when removing it for cleaning or replacing. Check the fi lters for tears or small holes.
A small hole can let dust pass through and out of the cleaner. Do not use a fi lter with holes or tears
in it; replace it immediately.
12