Sony AC-DN10A Mode D'emploi page 25

 AC IN connector
Connects to an AC power source using
the supplied AC power cord.
 DC output connector (XLR-type,
4-pin)
Supplies DC power to a portable
device using an optional DC power
cord.
 DC output connector for battery
charging (square, 5-pin)
Supplies power for charging a lithium-
ion battery pack.
 DC output switch
DC power supply is output to the DC
output connector when the switch is
in the  position.
 Lock release lever
To remove the battery pack, pull the
lithium-ion battery pack upward while
pushing the lever.
 AC power indicator
Indicates the connection status of the
AC power source and status of the DC
output as given below.
Indicator AC
power
source
Lit Connected 
(green)
Lit Connected Unmarked
(orange)
Not
Not lit
connected
* While the battery is charging, the DC output is
ON even if the DC output switch is in the
unmarked position.
** The battery backup function operates while
the battery pack is attached to the unit.
DC DC
output output
switch status
ON
position
OFF*
position
– OFF**
 Charging indicator
Displays the charging status of the
battery pack.
For details about the charging indicator and
charging status, see "About the charging
indicator" on page 30.
 DC output connector (square,
5-pin)
Supplies DC power to a camcorder,
portable editor, or field editor,
connected directly to the unit.
Location and Function of Parts
25