Sony AC-DN10A Mode D'emploi page 19

WARNING
Batteries shall not be exposed to
excessive heat such as sunshine, fire
or the like.
This symbol is intended
to alert the user to the
presence of uninsulated
"dangerous voltage"
within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of
electric shock to
persons.
This symbol is intended
to alert the user to the
presence of important
operating and
maintenance (servicing)
instructions in the
literature accompanying
the appliance.
WARNING: THIS WARNING IS
APPLICABLE FOR USA ONLY.
If used in USA, use the UL LISTED
power cord specified below.
DO NOT USE ANY OTHER POWER
CORD.
Plug Cap Parallel blade with ground
pin (NEMA 5-15P
Configuration)
Cord Type SJT, three 16 or 18 AWG
wires
Length Minimum 1.5 m (4 ft. 11 in.),
Less than 2.5 m (8 ft. 3 in.)
Rating Minimum 10 A, 125 V
Using this unit at a voltage other than
120 V may require the use of a
different line cord or attachment plug,
or both.
To reduce the risk of fire or electric
shock, refer servicing to qualified
service personnel.
WARNING: THIS WARNING IS
APPLICABLE FOR OTHER COUNTRIES/
REGIONS.
1. Use the approved Power Cord
(3-core mains lead) / Appliance
Connector / Plug with earthing-
contacts that conforms to the
safety regulations of each country/
region if applicable.
2. Use the Power Cord (3-core mains
lead) / Appliance Connector / Plug
conforming to the proper ratings
(Voltage, Ampere).
If you have questions on the use of
the above Power Cord / Appliance
Connector / Plug, please consult a
qualified service personnel.
WARNING
The apparatus shall not be exposed to
dripping or splashing. No objects
filled with liquids, such as vases, shall
be placed on the apparatus.
Operation of this equipment in a
residential environment could cause
radio interference.
GB
19