Accessories; Installing The Transport Refrigeration System; Prerequisites For The Installation; Installation Instructions - Dometic Frigo DC 2500 Instructions De Montage

Frigo DC
6

Accessories

Description
LED display for stationary cooling
Stationary cooling with Schuko plug
Condensation drainage for Frigo DC 3500 evaporator
Stationary cooling with CEE plug
7 Installing the transport refrigeration
system
7.1

Prerequisites for the installation

I
NOTE
For installing the transport refrigeration system, the following conditions must
be met in the vehicle:
• Battery capacity: at least 90 Ah
• Generator: at least 125 A
• Thermal insulation: at least k-value = 0.4 W/(m
7.2

Installation instructions

D
DANGER! Danger of fatal electric shock!
Before starting any installation work, disconnect the battery and make sure that
no voltage can be transferred to the electrical components. Danger of injury
due to live electrical components. When connecting the electrical compo-
nents, there is a risk of electric shock.
!
WARNING!
Improper interventions or fittings on and in the vehicle's electrical system and
electronics system can lead to impairment of the functions. This can lead to the
failure of vehicle-mounted components or vehicle safety equipment and as a
result to accidents involving personal injury or damage to the vehicle.
EN
Accessories
Ref. no.
A460881
9600010806
4443000383
9600024843
2
K)
25