Inspection Schedule - benza BZS38 Manuel De L'utilisateur

A. Inspection Schedule
The following list aims to offer some basic guidelines to performing a detailed inspection BEFORE and AFTER each use .
Certain checks will require some disassembly, i . e . the removal of the drive guard, to perform . Depending on various
environ-mental conditions and frequency of use, other inspection points may have to be added for each machine .
Item
Is the engine oil filled to recommended levels? Consult Engine Manufacturer's Manual .
Is the engine air cleaner properly attached and clean? Consult Engine Manufacturer's Manual .
Is the clutch cable properly attached? Refer to p .10 "Setting up the Scarifier for details .
Is the clutch cable worn or visibly damaged? Replace if necessary .
Is the drive belt tension set properly? Refer to p .16 "Replacing Drive V-Belt and Pulley"for details .
Does the drive belt show signs of wear and tear? Replace if necessary .
Are all the flails in good condition? Are any flails worn down to minimum length of 3"/7 .6 cm?
If so, have they been replaced?
Are the spring clips which secure the flails and rotor shaft in good condition? If so, makesure that the sprockets
will be replaced before any further use as worn sprocket canlead to chain slippage and other mechanical
issues that may cause serious harm to thejobsite and/or bodily damage to the operator .
Is the carriage securely fastened and free of all debris? Lingering debris may lead topremature wear on
the machine and shorten performance life .
Are the safety warning labels and other decals clearly identifiable and legible?
If not,ensure that fresh decals will be re-applied prior to use for operator safety .
Is the frame and handle in good condition with no visible damage or rusting?
If not,contact your local authorized dealer to replace machine prior to further use .
Yes No
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_] [_]
[_]
[_]
I 101