Modifications And Alterations; Warranty; Safety Signs Used In The Instruction Manual - THOMSON WB 40 Instructions De Montage

Safety
1.7

Modifications and alterations

The linear units may not be modified neither for construction nor safety reasons without our
written approval. Any such unauthorized alterations will void our liability.
Wearing parts and spare parts may only be replaced after consultation with our service
engineers or by our service engineers themselves.
In general, safety or protection devices may not be removed or made inactive.
If special add-on parts are used, follow the manufacturer's assembly instructions.
The following regulations apply:
 relevant accident prevention regulations
 generally accepted safety regulations
EU Directives and

 national regulations
1.8

Warranty

The warranty conditions were stated in the sales documentation. Any claim for warranty is
voided if
 the machine has not be used in accordance with its intended use,
 the instructions stated in this instruction manual have not been followed,
the machine has been modified without the manufacturer's permission,

 screws sealed with locking enamel have been unscrewed.
The manufacturer is only liable if original spare parts have been used for maintenance and
repair work.
1.9

Safety signs used in the instruction manual

This symbol indicates possible danger for persons. Please follow the instructions to
prevent injury.
This symbol indicates possible danger for the machine. Please follow the instructions
to prevent damage to the machine.
This symbol indicates special information
• on optimum use or
• on easier operation of the machine.
28
05/08
WIESEL BASELine