Unit Configuration - Oase BioTec Premium 80000 EGC Notice D'emploi

3.2

Unit configuration

 A Description
1 Container cover
2 Level detection device
− Signals the water level in the filter system
3 Signal box with level detection device and temperature probe
− The signal box is connected to the control system.
4 Rollers for guiding the filter drum
5 Foam filter status detection
− Signals when the foam filters are soiled
6 Temperature probe
− monitors the water temperature
7 Filter drum with 6 screen elements
− screen elements for coarse dirt particles larger than 125 µm
8 Inner cover
− foam filter holder
− integrated water level indicator
9 DN 110 outlet
10 Foam filters with holder
− 2x blue
− 2x red
− 2x violet
11 Rinsing pump for supplying the rinsing device
12 DN 75 dirt outlet with slide valve
13 Connection set, for connecting the Bitron
− 2 × 38 / 50 mm (1½ / 2 ") adapters
− 2 × 30° inlet bends
− 2 × union nuts
− 2 × flat seal 60 × 47 × 3 mm
14 Connection set, for connecting filter pumps
− 1 × 38 mm (1½ ") hose connector
− 1 × non-return valve
− 1 × 50 mm (2 ") hose connector
− 1 × union nut for hose connector
− 1 × 40 ... 60 mm hose clip
− 1 × 90° (2 ") connection bend
− 1 × union nut for connection bend
− 1 × flat seal 56 × 43 × 3 mm
15 2 × 38 mm (1½ ") connection, closed with sealing plugs
− Optional connection for a Bitron UVC clarifying unit
16 50 mm (2 ") connection for connecting the filter pumps
17 DN 110 dirt outlet for coarse dirt
18 Drum motor for filter drum
− the motor is connected to the control system
19 Dirt channel
− collects the coarse dirt and rinsing water from the screen elements
20 Rinsing device
− sprays water at high pressure onto the screen elements to rinse off the coarse dirt
21 Turmsilon GTI 300 GK Tube 10 ml
− Grease for the drum seal
22 2 × caps, cap nuts for fixing the EGC box when mounting it on the container wall
23 Control system with EGC box
24 Connector for drum motor
25 Connector for signal box
26 Mains connection cable
27 Connector for rinsing pump
- EN -
43