Daily Maintenance - EdilKamin LOGO Installation, Usage Et Maintenance

DAILY MAINTENANCE

leaning must be carried out with a vacuum cleaner. (see optional e tras page
he whole procedure takes up a few minutes ever da .
Open the door and remove and empt the ash pan (**).
O O E E RES
Remove the combustion chamber or use the spatula to scrape it and clean out an blocked holes on all sides.
Remove the combustion chamber ( ) and scrape with a spatula (supplied), clean an obstructions in the apertures.
Suction the combustion chamber holder, clean the contact edges and remove the smoke caps ( ).
lean the glass, if necessar (when cold).
**
g.
lean the hearth (with a brush) after having removed the smoke deviators ( - g. )
se the swabs (* - g. ).
Empt the pellet hopper and clean the base with the vacuum cleaner.
When cleaning the combustion chamber, lift the smoke caps ( - g. E) and suction the four pipes underneath ( - g. E)..
g.
MAINTENANCE
E O O E ELLE
1
g.
*
).
O ER.
g.
2
g. E
- 33
-
2
2
2