Controls And Operating Functions - GE RARWT1W Manuel Du Propriétaire Et Instructions De Montage

Controls and Operating Functions

1. Mode Button
Controls operating mode of the air conditoner. Use this button
to toggle between OFF, Fan only, Cool, Heat Pump, Heat
Pump + Furnace, and Furnace modes.
Only use heat pump mode in conjunction with ARH15AAC*
models (See installation for heat pump models).
In OFF mode, the air conditioner and furnace will not operate.
In Fan Only mode, the fan will operate to circulate air through
the RV.
In Cool mode, the air conditoner will operate to lower the RV
temperature to the setpoint.
In Heat Pump Mode, the unit will operate to raise the RV tem-
perature to the setpoint if the setpoint is within 4°F (2°C) of the
RV temperature.
In Heat Pump + Furnace Mode, If you are beyond a 4°F (2°C)
is recommended for use during night operation or when large
drops in temperature re expected.
In Furnace mode, the RV's furnace will operate to raise the RV
temperature to the setpoint.
2. Fan Button
Controls operating speed and mode of the fan. Use this button
to toggle between low and high fan speeds.
Use this button to toggle between "FAN ON" and "AUTO FAN".
In "FAN ON" mode, the fan will run even when the setpoint has
been reached.
been reached.
3. Temperature Selection Buttons
Use these buttons to raise and lower the desired setpoint
temperature.
4. LCD Display
Displays operating mode, temperature setpoint, and fan speed.
8
49-5000400 Rev. 1