Using The Appliance; Understanding The Air Quality Light; Switching On And Off; Changing The Auto Mode Setting - Philips AC3259 Mode D'emploi

4 Using the
appliance
Understanding the air
quality light
IAI Air quality
level light color
1-3 Blue
4-6 Blue-Purple
7-9 Purple-Red
10-12 Red
The air quality light automatically goes
on when the appliance is switched on,
and lights up all colors in sequence.
In a short time the air quality sensors
select the color that corresponds to the
ambient air quality.

Switching on and off

1
Put the plug of the appliance in the
power socket.
2
Touch to switch on the
appliance (fig.j).
» The appliance operates under
the auto mode by default.
» After measuring the air quality
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
» After measuring the particle
matters in the air, the air
purifier shows the IAI level and
operates in the auto mode with
displayed on the screen
(fig.k).
3
• After the appliance is switched off by
• If the appliance is connected to
Air quality
level
Good
Fair
Poor
Changing the Auto mode
Very poor
setting
You can choose the General mode
(
Bacteria & Virus mode (
Allergen mode
The specially designed Allergen mode
can effectively remove common
allergens such as pollen and pet dander.
•
General mode
A smart auto-setting that automatically
adjusts the air purifier's settings to the
ideal level.
•
Touch and hold for 3 seconds to
switch off the appliance.
Note
the on/off button , if the plug is still
in the power socket, the appliance will
operate under the previous settings
when it is switched on again.
Internet after it's turned off, the sensor
will still measure the indoor air quality
and send this real-time data to the
app.
), the Allergen mode (
Touch the Auto mode button
select the Allergen mode (fig.l).
» Auto(A) and display on the
screen.
Touch the Auto mode button
select the Genereal mode (fig.m).
» Auto(A) and
display on the
screen.
) and the
).
to
to
EN
7