Télécharger Imprimer la page

Kopp 2931.1302.9 Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Please read the operating instructions carefully!
Dependable early warning and protection against
burglary is only ensured if this radio magnetic
sensor is used in accordance with the following
instructions.
Application
Monitoring of doors and windows. Detects the ope-
ning or closing of doors and windows.
Monitoring of objects to prevent unauthorized
removal.
Mounting
Select a suitable mounting location. Drilling guide
exists. Plastic base for height adjustment .
Before final mounting, please check to ensure that
the intended receiver reliably receives the radio sig-
nal of the magnetic contact. If necessary, change the
position of the receiver or the magnetic sensor.
The center of the magnet must match the arrow posi-
tion on the housing of the radio magnetic sensor .
Note: Do not mount on or near metal surfaces (e.g.
hinges, fittings, frames).
Power supply
3 V lithium battery CR 2450.
Battery life up to 2.5 years.
LED  blinks 1x when the battery is inserted .
Ensure correct battery polarity.
Battery capacity is monitored.
Recommendation: Replace battery every 2 years
Sabotage contact 
For proper operation, install the housing lid correctly
= sabotage contact closed. A sabotage message is
transmitted in case of attempted sabotage.
External contact
A second monitoring loop in the form of an additi-
onal contact  can be connected . This can be
an additional magnetic contact, reed contact or
other contact. Electronics automatically detect the
additional contact after this has been closed. Radio
magnetic sensor and external contact work synchro-
nously/parallel.
Without external contact:
Terminals  can remain open.
Wire jumper not necessary .
Status display
LED  blinks 1x when the battery  is inserted and
then goes out:
• Battery full
• Device ready for operation
LED  flashes 1x per minute:
• Battery weak
• Alarm recognition still possible
• Signal broadcast still possible
LED  blinks quickly:
• Battery almost empty
• Alarm recognition no longer possible
• Signal broadcast no longer possible
5

Publicité

loading