Function/Operation - Econ SHL 100-Ex Notice D'utilisation

7. Mounting
Note: Position number in () see sketches on page 30.
Charging adapter SHL 00-Ex is as-signed for wall installation. Fixing dimen-sions please see
dimensioned drawing.
Pay attention to an assembly without voltage! Bruises/dents of wall surface must be levelled up
by distance plates.
The closed charging set can be fitted from front with 4 fastening screws M4.
The charging adapter is not explosion-proof, so install it always out of ex-area.
Charge the portable lamp always out of ex-area!

8. Function/operation

Connect charging adapter to the supply network by the charging cable. 230 V charg-ing cable
with the socket (6). 2 V/24 V charging cable with socket (5).
Press portable lamp on floor space with the 2 naps (6) and into the holding webs (3). Portable
searchlight will be automatically contacted and charged by the contact pins (5).
LED display
. LED (), green, network tension exists.
2. LED (2), green, charging current exists (portable searchlight is parking in the charging set).
If the portable searchlight indicates errors, e.g. broken filament g LED 2 is flashing – charging
current is still flowing
The charging adapter itself is not explosion-proof, so installation and charging on principle not in
potentially explosive areas!
The temperature must be more than 0 °C when charging is executed.
9. Repair an maintenance
The charging set must not be modified or changed. Only the authorized personnel are allowed to
execute repairs.
Please use only original spare parts of ecom instruments Company.
29