Repair And Maintenance - Econ SHL 100-Ex Notice D'utilisation

Head of lamp
It can be tipped ahead by 20° and back-wards by 90°. At the light outlet frame are guiding grooves
() for the pick-up of a C-washer (lens of the headlight).
Lenses
The lens is added to the portable lamp. It can always be carried along in the pocket (2). Coloured
lens of the headlight will be possible if required.
Belt hook
At the back of head of lamp a stable belt hook of high-grade steel can be installed (). It makes
possible the hanging up of the portable lamp into the belt; a carabine swivel can be also hung up
by a ring eye-let.
Plug-in sign
The plug-in sign (3) can be engraved. These signs can be bought later, too. The sign is interchan-
geable with a brass sign.
4. Charging
The charging must be executed only with the ecom instruments charging set SHL 00-Ex. It is
charged optimally and in due form by the I/U charging characteristic line prescribed for lead-gel
accumulators.
Other charging sets could damage the battery, so explosion proofness of port-able lamp
is endangered or/and abol-ished.
The battery should be charged at tempera-tures over 0 °C. Charging duration about 2 hours.
Contact to the charging set is made by 3 naked contact pins (6) at the back of port-able lamp
– please keep visible end faces clean.
The portable lamp is not charged on delivery.

5. Repair and Maintenance

Maintenance work at wearing parts must be executed only by authorised and prop-erly trained
staff.
In order to ensure the blameless working of the portable lamp only original spare parts given in
the spare part list are replaced.
Damages at the casing or at the electricity endanger the explosion-proofness and require repair
in the plant.
23