Econ SHL 100-Ex Notice D'utilisation page 26

5.3 External fuse
For that see illustrations on page 26.
. Unscrew 3 Torx screws on the left and right at the housing and on the bottom (5).
2. Draw the back panel of casing (8) from the headlamp casing.
3. Disconnect coupler plugs (7) (Press locking hook and separate coupler plugs).
4. Release battery contact (4) positive pole, too.
5. Draw out external fuse (6) from the guiding. Insert and contact the new ex-ternal fuse
ET002095 in re-versed order.
6. Close and screw up the casing
Attention: Observe a good sealing (protection provided by enclosures!).
Is the sealing still okay?
Illustrations
25